Pietenpol-List: Slick Model 447 magneto

matronics · Post by **matronics** » Sat Aug 04, 2001 5:42 am

Original Posted By: "Cy Galley"
Subject: Pietenpol-List: Slick Model 447 magnetoHello A&P's. I bought this mag. at Oshkosh for a future project. Isany one familiar with it? are parts available for it, or did I buy anextinct dinosaur? Leon S.________________________________________________________________________________

matronics · Post by **matronics** » Sat Aug 04, 2001 8:02 am

Original Posted By: "Leon Stefan"
I believe it is one of the "throw-a-way Mags produced by Slick back in the60s and is not supported by Slick any more. Slick never sold parts for itas it was about $30 new.If you really have some questions e-mail Harry(at)unisonindustries.com HarryFenton is one of the good guys. I think you purchased a boat anchor.Cy Galley, TC - Chair, Emergency Aircraft Repair, OshkoshEditor, EAA Safety Programscgalley(at)qcbc.org or experimenter(at)eaa.org----- Original Message -----

matronics · Post by **matronics** » Mon Aug 06, 2001 1:04 pm

Original Posted By: nle97(at)juno.com
Subject: Re: Pietenpol-List: Slick Model 447 magneto

matronics · Post by **matronics** » Mon Aug 06, 2001 1:28 pm

Original Posted By:
John,Are you familiar with the Slick Model #447 mag?I have a couple with RIGHT rotation but have nottaken them out of the box. I bought them at adiscount a few years ago and don't know if theycan be used on my Cont. A-80 engine.Thanks.Mike KingGN-177MKDallas----- Original Message -----

matronics · Post by **matronics** » Mon Aug 06, 2001 1:35 pm

Original Posted By:
John,Sorry about that. I wrote down the wrong magnumber. That should have read Slick Model #4220with RIGHT rotation. Not #447 as previouslywritten.There was a sale on these a few years ago and Ipurchased a couple not knowing if they would fitmy Cont. A-80 engine. If not, I have friends with otherengines it could help.Thanks.Mike KingGN-177MKDallas----- Original Message -----

matronics · Post by **matronics** » Mon Aug 06, 2001 1:48 pm

Original Posted By: nle97(at)juno.com
Subject: Re: Pietenpol-List: Slick Model 447 magneto

matronics · Post by **matronics** » Mon Aug 06, 2001 1:51 pm

Original Posted By: nle97(at)juno.com
Subject: Re: Pietenpol-List: Slick Model 447 magneto

matronics · Post by **matronics** » Mon Aug 06, 2001 1:56 pm

Original Posted By:
John,That would be GREAT. I would love to see how the magswork. It would be a terrific learning experience.So from what you are saying, the Model #4220 Slickmag can be used my Cont. A-80 with a few modifications?Thanks again John. I would like to come by and visitsometime. Next time on my way to Leakey fromDallas, I'll try to stop by and see your project.By the way, I dated a gal back in the 60's who wasfrom Pipe Creek. Can't remember her name though.I was in my teens and had other things on my mind.Thanks.Mike----- Original Message -----

matronics · Post by **matronics** » Mon Aug 06, 2001 1:57 pm

Original Posted By:
John,OK. I will check it out with a shop around here inDallas. If it can't be changed, I will find somethingto do with them.Mike----- Original Message -----

matronics · Post by **matronics** » Mon Aug 06, 2001 2:31 pm

Original Posted By: "Cy Galley"
Thanks Cy----- Original Message -----

matronics · Post by **matronics** » Mon Aug 06, 2001 2:39 pm

Original Posted By: "Mike King"
I would check with Harry Fenton harry(at)unisonindustries.com ----- Original Message -----