Original Posted By: nle97(at)juno.com
Subject: clamps This may be of interest to the group, from the Horizon - 1 group. >>> Mike B - Piet N687MB ( Mr Sam )________________________________________________________________________________
Pietenpol-List: clamps
Pietenpol-List: clamps
Original Posted By: Ken Beanlands
This may be of interest to the group, from the Horizon - 1 group. >>> Mike B - Piet N687MB ( Mr Sam ) This may be of interest to the group,from theHorizon - 1 group. Clamps:I found acheapsource of clamps. Get a scrap length of PVC drain wasteandventpipe. The larger the diameter the better (6 is best, but2works).Slice off rings about 1/4 to 1/2 thick. Now slicethroughring radially atone place only so the ring looks like the letterC when spread open. Voila!Instant clamp. The2' ones are real bulldogs and the 6 ones are prettyweak,but youcan control the squeeze factor but the thickness ofyoursliceMike B - Piet N687MB ( Mr Sam)________________________________________________________________________________
This may be of interest to the group, from the Horizon - 1 group. >>> Mike B - Piet N687MB ( Mr Sam ) This may be of interest to the group,from theHorizon - 1 group. Clamps:I found acheapsource of clamps. Get a scrap length of PVC drain wasteandventpipe. The larger the diameter the better (6 is best, but2works).Slice off rings about 1/4 to 1/2 thick. Now slicethroughring radially atone place only so the ring looks like the letterC when spread open. Voila!Instant clamp. The2' ones are real bulldogs and the 6 ones are prettyweak,but youcan control the squeeze factor but the thickness ofyoursliceMike B - Piet N687MB ( Mr Sam)________________________________________________________________________________
Pietenpol-List: clamps
Original Posted By: Matt Dralle