Pietenpol-List: Wire Wheel Hubs

matronics · Post by **matronics** » Wed Oct 29, 2003 2:21 pm

Original Posted By: "Ken Hannan"
4130 wire wheel hubs. I know I.ve seen the plans several times, but just now whenI need them, I can't remember what they are printed in. Are they on the netany place? Or are they in a newsletter? Dang, this getting older just ain't asgood as they say it is.Barry________________________________________________________________________________

matronics · Post by **matronics** » Thu Oct 30, 2003 1:26 pm

Original Posted By: Doc Mosher

matronics · Post by **matronics** » Thu Oct 30, 2003 4:14 pm

Original Posted By:
Thanks ChrisBarry----- Original Message -----

matronics · Post by **matronics** » Thu Oct 30, 2003 5:30 pm

Original Posted By: javier cruz
Subject: Re: Pietenpol-List: Wire Wheel HubsI don't mean to but in, but there's an article by Grant Maclaren on Howard Henderson's wire wheels on p. 36 of theMarch 1990 issue of Kitplanes. Also seep.10 of issue 10/Jan 2003 BPA Newsletter and p. 3 of issue 4/July 2001 BPA Newsletter. Is the article being emailed different from these? If so, I'd liketo add it to my references. Carl Vought________________________________________________________________________________Date: Thu, 30 Oct 2003 16:48:35 -0800 (PST)

matronics · Post by **matronics** » Fri Oct 31, 2003 1:05 am

Original Posted By: Clif Dawson

matronics · Post by **matronics** » Fri Oct 31, 2003 4:19 pm

Original Posted By:
Chris,I would love to get the wire wheel info. That is the way I am going.Alex Sloanalexms1(at)bellsouth.net----- Original Message -----

matronics · Post by **matronics** » Fri Oct 31, 2003 4:37 pm

Original Posted By: Kip & Beth Gardner
Subject: Re: Pietenpol-List: Wire Wheel HubsHi Chris...If you wouldn't mind, please include me in the wire wheel hub article emailing..Thank you Carl Vought________________________________________________________________________________Date: Fri, 31 Oct 2003 18:28:51 -0500

matronics · Post by **matronics** » Fri Oct 31, 2003 11:35 pm

Original Posted By: Matt Dralle
A suggestion regarding wire wheels.....Dale and I followed Howard Hendersons hub plans which accomodate 40 spokes.After the hubs were made we went to the motorcycle boneyard to find rims.We discovered that 40 spoke rims are much less common than 36 spoke rims.The boneyard had shelves full of 36 spoke rims but 40 spoke rims were quiterare.My next set will be 36 spoke hubs.Greg Cardinal________________________________________________________________________________Date: Fri, 31 Oct 2003 22:28:29 -0800

matronics · Post by **matronics** » Sat Nov 01, 2003 12:23 am

Original Posted By:
Hello, Chris, I would also appreciate some information about the wire wheel hubs.Thanks! Dave Paulsen________________________________________________________________________________

matronics · Post by **matronics** » Sun Nov 02, 2003 7:42 am

Original Posted By: "DOUGLAS BLACKBURN"
Subject: Re: Pietenpol-List: Wire Wheel HubsBarry, I would like to be added to the list of those wanting the wire wheel plans. Ken Conrad wizzard 187 @aol.com thanks________________________________________________________________________________

matronics · Post by **matronics** » Sun Nov 02, 2003 9:44 am

Original Posted By:
I would like a copy of the info too. Maybe we should just post it.Hank Jhjarrett(at)hroads.net----- Original Message -----

matronics · Post by **matronics** » Sun Nov 02, 2003 10:16 am

Original Posted By: "John Dilatush"
I agree Hank. So it's now posted at:http://www.mykitplane.com/Taxiway/TheHa ... umID=167If that link fails (mine usually do....) try:http://www.mykitplane.com/Taxiway/TheHa ... lery.cfmIf THAT fails, just go to mykitplane.com and view my photo albums.......Thanks Barry!Jim in Plano, where MY hubs are on the UPS truck ON THE WAY to Plano!!!Buchanan's will have them in a week or so and I'll have them back and powdercoated (black) before I know it! WOOHOO!!!!>> I would like a copy of the info too. Maybe we should just post it.> Hank J> hjarrett(at)hroads.net>>________________________________________________________________________________

matronics · Post by **matronics** » Sun Nov 02, 2003 2:05 pm

Original Posted By: Isablcorky(at)aol.com
Subject: Re: Pietenpol-List: Wire Wheel HubsPlease add me to the list as well, thank you very much.Rick Hollandat7000ft(at)aol.comBarry, I would like to be added to the list of those wanting the wire wheel plans.________________________________________________________________________________

Brodhead Pietenpol Association