Pietenpol-List: ZS-VJA Approaching deadline

[matronics]

Original Posted By: "Roel Stausebach"
Hi There PiettersWell the dead line has been set and my bird will be back in the air atthe end of July, I just had the motor and the engine mount x-rayed, andall is well. The wings are back on and the small jobs are now at hand,90% done and 90% to go.Regards Norman StapelbergZS-VJA (28Days to go)South Africa________________________________________________________________________________

[matronics]

Original Posted By: Norman Stapelberg
Did not know you were out of the air Norman? What happened?Regards,Roel ----- Original Message -----

[matronics]

Original Posted By: owner-pietenpol-list-server(at)matronics.com
I had a prop fail in flight a couple of months a go, my wife said she isgoing away on vacation for a couple of days with the family, I shouldget a lot of work done by Saturday, if not finished I should get acouple of late nights in.RegardsNorman StapelbergZS-VJASouth Africa-----Original Message-----

[matronics]

Original Posted By: Carl D. Vought
check the archive.... he talked about it a few months back and even showed somepictures of the damage.DJ----- Original Message -----

[matronics]

Original Posted By: At7000ft(at)aol.com

[matronics]

Original Posted By: At7000ft(at)aol.com
That's pretty much what I did with mine. I used a few starp clamps work very wellfor this task.DJ----- Original Message -----

[matronics]

Original Posted By: DJ Vegh
I meant to type "Strap" clamps... not starp. what the heck is a starp anyways??it is like a carp?DJ----- Original Message -----

[matronics]

Original Posted By:
Check out the archive as DJ recommended the post should be on the 21 Feb 2004NormanZS-VJANorm your in-flight prop failure sounds like a heck of a story. Anychance you could spare the time to share it with us on the Pietlist? Carl Vought/Huntsville, AL/USA________________________________________________________________________________