Re: Pietenpol-List: Mixing t-88

matronics · Post by **matronics** » Wed Apr 07, 2010 4:26 pm

Original Posted By: shad bell

matronics · Post by **matronics** » Wed Apr 07, 2010 4:52 pm

Original Posted By: Ben Charvet
Subject: Re: Pietenpol-List: Mixing t-88you're wasting your time and resources going about it that way, I am a builder and cheep also. I go to Quiznos, buy a sandwich or a soda and ask the kid behind the counter if he minds my taking a bunch of those condiment cups. The kid says sure help your self I don't mind and "presto chango" just like magic I markle me a bunch and I got mixing cups, disposable, light weight and perfect for a one or 2 pump mix, no muss no fuss just mixing epoxyand building an airplane. The on my morning travels to work I get me a cup o Coffee and a bunch of those popsicle stick wooden mixing sticks and I got a ways to mix evenly my brew of glue. The heart breaking is having to purchase and pay for the flux brushes to apply the epoxy, rats..... I sure hatebuying them, and ,remember never pay for anything that you can markle. You heard it first here!John In a message dated 4/7/2010 5:25:08 P.M. Eastern Daylight Time, aviatorbell(at)yahoo.com writes:--> Pietenpol-List message posted by: shad bell Just go to Tower Hobbies' web site or your local R/C hobby shop, and buy some epoxy mixing cups, they are clear plastic, graduated 1 oz cups. I bought some at the local hobby shop for 3-4 dollers for 50 of them. I am cheap, so I wipe them out with a rag soaked in acetone then reuse them as longas I can. They are probably available at a medical supply store, as a medication cup, pill cup etc.Shad________________________________________________________________________________Date: Wed, 07 Apr 2010 18:03:01 -0400

matronics · Post by **matronics** » Wed Apr 07, 2010 6:43 pm

Original Posted By: Ben Charvet
All these little cups and condiment containers are good ideas, just be careful that you aren't using waxed cups. The wax will contaminate and weaken the epoxy.Greg Cardinal ----- Original Message -----

matronics · Post by **matronics** » Wed Apr 07, 2010 7:43 pm

Original Posted By: Ryan Mueller
Subject: Re: Pietenpol-List: Re: Mixing t-88

matronics · Post by **matronics** » Wed Apr 07, 2010 9:24 pm

Original Posted By: Mark Chunard
A builder has to markle what he can and pay for what he can't. The builders creed,words to live by. John------Original Message------

matronics · Post by **matronics** » Wed Apr 07, 2010 9:39 pm

Original Posted By: Paul N. Peckham
I had heard that Bill Church has one or two of them laying around that he's notusing but that could just be a rumor started by some trustworthy Piet builder.John------Original Message------

matronics · Post by **matronics** » Wed Apr 07, 2010 11:36 pm

Original Posted By: Jim

matronics · Post by **matronics** » Thu Apr 08, 2010 11:19 am

Original Posted By: "Bill Church"
Ryan,I am definitely interested. Just want to know a couple things, what plans- Pietenpol or Grega? What is the length of the fuse firewall to tail? And can I come get it tommorrow? I,m ready to roll.Don't need the engine though. Got a fresh A-65 and prop ready to go. Call me. 314-974-4589Jeff WilsonN899WT (reserved)________________________________________________________________________________Subject: Pietenpol-List: Re: Mixing t-88

matronics · Post by **matronics** » Thu Apr 08, 2010 5:37 pm

Original Posted By: shad bell

matronics · Post by **matronics** » Fri Apr 28, 2017 9:34 pm

Original Posted By: "John Recine"
> Subject: Pietenpol-List: Ohio piet fly-in 2010>>> OK Group, I have been out in the hanger today starting on the annual onthe piet, I am trying to get another estimate on atendance. It will be SatJune 19, the day befor father's day. If people want to fly in on fridayafternoon that is fine with me, I have room for tent camping, ________________________________________________________________________________Subject: Re: Pietenpol-List: Re: Mixing t-88

Brodhead Pietenpol Association