Original Posted By: Ken Bickers
Subject: Pietenpol-List: covering supplies
Pietenpol-List: covering supplies
Pietenpol-List: Re: covering supplies
Original Posted By: Michael Perez
Ken - This won't be as much help as you want, but it may get you going in the rightdirection. My poly-fiber manual has a material list for a piet in the backand I used that. If someone has their manual handy maybe they can scan thatpage to you. Otherwise, I'll be at the hangar tomorrow evening with Shelleyand Markle. I can get the manual and e-mail you the info. You can obviouslytranslate from poly to stewart. My recollection is that it was pretty accurate.--------Kevin "Axel" PurteeNX899KPAustin/San Marcos, TXRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 15 Aug 2012 10:00:58 -0700 (PDT)
Ken - This won't be as much help as you want, but it may get you going in the rightdirection. My poly-fiber manual has a material list for a piet in the backand I used that. If someone has their manual handy maybe they can scan thatpage to you. Otherwise, I'll be at the hangar tomorrow evening with Shelleyand Markle. I can get the manual and e-mail you the info. You can obviouslytranslate from poly to stewart. My recollection is that it was pretty accurate.--------Kevin "Axel" PurteeNX899KPAustin/San Marcos, TXRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 15 Aug 2012 10:00:58 -0700 (PDT)
Re: Pietenpol-List: covering supplies
Original Posted By: Ken Bickers
Ken,You know my plane. I used every drop of (Stewarts) a gallon of yellow, and about 1/2 gallon of black. Of course the lighter colors take more coats.Dan HelsperPuryear, TN-----Original Message-----
Ken,You know my plane. I used every drop of (Stewarts) a gallon of yellow, and about 1/2 gallon of black. Of course the lighter colors take more coats.Dan HelsperPuryear, TN-----Original Message-----
Pietenpol-List: covering supplies
Original Posted By: Jim Markle
Re: Pietenpol-List: covering supplies
Original Posted By: Ken Bickers
Subject: Re: Pietenpol-List: covering supplies
Subject: Re: Pietenpol-List: covering supplies
Pietenpol-List: Re: Control sticks in position...
Original Posted By: Michael Groah
Bill,These two posts give the best overview of my steel-tube fuselage.http://forums.matronics.com/viewtopic.p ... ultz...and this site has further information on the project:http://www.rotecengines.com/Projects/Ja ... ------Jake Schultz - curator,Newport Way Air Museum (OK, it's just my home)Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 15 Aug 2012 12:04:57 -0700 (PDT)
Bill,These two posts give the best overview of my steel-tube fuselage.http://forums.matronics.com/viewtopic.p ... ultz...and this site has further information on the project:http://www.rotecengines.com/Projects/Ja ... ------Jake Schultz - curator,Newport Way Air Museum (OK, it's just my home)Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 15 Aug 2012 12:04:57 -0700 (PDT)
Re: Pietenpol-List: Re: covering supplies
Original Posted By: "kevinpurtee"
Kevin, I scanned a copy for him on your suggestion. He received it OK so there is no reason for you to worry about it. Hope you're doing as well as you look! Chuck----- Original Message -----
Kevin, I scanned a copy for him on your suggestion. He received it OK so there is no reason for you to worry about it. Hope you're doing as well as you look! Chuck----- Original Message -----