Pietenpol-List: bottom fitting plate

[matronics]

Original Posted By: "Jack Phillips"
On pg. 3 of the plans in the lower left corner =9Cbottom fitting plate=9D that goes on the bottom of the fuselage. My question: should the 5/16=9D holes be 28 3/4=9D apart, as that would be the center to center width of the wing spars? Dennis________________________________________________________________________________

[matronics]

Original Posted By: owner-pietenpol-list-server(at)matronics.com
That's how I installed mine.ChrisSacramento, CaWestcoastpiet.com _____