Propeller question

Discussion area for builders of Pietenpol aircraft, both beginners and experienced folks. Share ideas, ask questions and help build the Pietenpol community.
Post Reply
BBM
Posts: 33
Joined: Wed Jul 11, 2018 7:49 am

Propeller question

Post by BBM »

Don't want to open a can of worms but I have a propeller question

The Skyscout ( Model B powered ) I have is using a Culver 74x48 prop.

Engine compressions are good and it gets 2000rpm on the ground.



In flight the aircraft is quite slow and barley maintaining 55 mph , climb is abysmal.

1930s flying and glider manual says use a 74x48 prop but it sure is not giving the airplane the performance. I think it should.

Many people recommend using a 72x42 or 44 standard Cub prop



I know there are lots of opinions in props but I would appreciate hearing what others are using in their Aircampers/Skyscouts
User avatar
Richard Roller
Posts: 370
Joined: Mon May 22, 2017 11:14 am
Location: Olathe, Ks.

Re: Propeller question

Post by Richard Roller »

What is your rpm in cruise?
BBM
Posts: 33
Joined: Wed Jul 11, 2018 7:49 am

Re: Propeller question

Post by BBM »

1600-1800
zippythehog
Posts: 10
Joined: Wed Feb 21, 2024 10:04 pm

Re: Propeller question

Post by zippythehog »

BBM,
You might try the Culver prop calculator, here:
https://www.culverprops.com/PropPitchCalculator.html

You know your engine peak power rpm better than I.
Post Reply