Original Posted By: Jim Markle
Pietenpol-List: Wing
Re: Pietenpol-List: Re: spraying varnish on wings/ tailsurfaces
Original Posted By: Rick Holland
Subject: Re: Pietenpol-List: Re: spraying varnish on wings/ tailsurfaces
Subject: Re: Pietenpol-List: Re: spraying varnish on wings/ tailsurfaces
RE: Pietenpol-List: Article on Ken Perkins
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Agreed.super article. The archives for the magazine are outstanding, withhundreds of Piet articles.JackDSM _____
Agreed.super article. The archives for the magazine are outstanding, withhundreds of Piet articles.JackDSM _____
Re: Pietenpol-List: Article on Ken Perkins
Original Posted By: helspersew(at)aol.com
> Re: Wing
Original Posted By: Michael D Cuy
> > Now that we have that out of the way...who has the good drawings for the> three piece wing. I have the Grega drawings, but I wonder if there is a> better, or at least an alternate set someone would recommend.> Thanx, Don Don..i got my 3 piece drawings from Don Pietenpol at 1604 Meadow Circle SE.Rochester MN 55904-5251 3 years ago they sold for $12 US I also have the Grega version drawings but his fittings are way to heavyfor a Piet. .....Doug.....________________________________________________________________________________
> > Now that we have that out of the way...who has the good drawings for the> three piece wing. I have the Grega drawings, but I wonder if there is a> better, or at least an alternate set someone would recommend.> Thanx, Don Don..i got my 3 piece drawings from Don Pietenpol at 1604 Meadow Circle SE.Rochester MN 55904-5251 3 years ago they sold for $12 US I also have the Grega version drawings but his fittings are way to heavyfor a Piet. .....Doug.....________________________________________________________________________________
> Re: Wing
Original Posted By:> > ADonJr(at)aol.com
> > > > ----------
> > > > ----------
> > Re: Wing
Original Posted By: Steve Eldredge
> > > > Now that we have that out of the way...who has the good drawings forthe> > three piece wing. I have the Grega drawings, but I wonder if there isa> > better, or at least an alternate set someone would recommend.> > Thanx, Don> > > Don..i got my 3 piece drawings from Don Pietenpol at 1604 Meadow CircleSE.> Rochester MN 55904-5251 3 years ago they sold for $12 US> I also have the Grega version drawings but his fittings are way toheavy> for a Piet.> > .....Doug.....________________________________________________________________________________
> > > > Now that we have that out of the way...who has the good drawings forthe> > three piece wing. I have the Grega drawings, but I wonder if there isa> > better, or at least an alternate set someone would recommend.> > Thanx, Don> > > Don..i got my 3 piece drawings from Don Pietenpol at 1604 Meadow CircleSE.> Rochester MN 55904-5251 3 years ago they sold for $12 US> I also have the Grega version drawings but his fittings are way toheavy> for a Piet.> > .....Doug.....________________________________________________________________________________
> Pietenpol-List: Wing
Original Posted By: brian.e.jardine@l-3com.com
>>>Varnishing under metal fittings is the proper procedure. Don't forget to varnishinside all bolt holes.>> >>Greg Cardinal>>>----- Original Message ----- >>From: catdesigns(at)att.net >>To: pietenpol-list(at)matronics.com >>Sent: Thursday, January 28, 2010 1:52 AM>>Subject: Pietenpol-List: Wing>> >>For all you wing builders, I am planing on building my wings (3-piece) completelythen take the fittings off to varnish the wood. Is this ok or is this goingto screw something up?>> >>Chris>Sacramento, CA>WestCoastPiet.com href="http://www.matronics.com/Navigator?Piet ... nics.com/c " target=_blank rel=nofollow>http://www.matronics.com/Navigator?Piet ... s.comblank rel=nofollow>http://www.matronics.com/contribution >________________________________________________________________________________
>>>Varnishing under metal fittings is the proper procedure. Don't forget to varnishinside all bolt holes.>> >>Greg Cardinal>>>----- Original Message ----- >>From: catdesigns(at)att.net >>To: pietenpol-list(at)matronics.com >>Sent: Thursday, January 28, 2010 1:52 AM>>Subject: Pietenpol-List: Wing>> >>For all you wing builders, I am planing on building my wings (3-piece) completelythen take the fittings off to varnish the wood. Is this ok or is this goingto screw something up?>> >>Chris>Sacramento, CA>WestCoastPiet.com href="http://www.matronics.com/Navigator?Piet ... nics.com/c " target=_blank rel=nofollow>http://www.matronics.com/Navigator?Piet ... s.comblank rel=nofollow>http://www.matronics.com/contribution >________________________________________________________________________________
> Pietenpol-List: Wing
Original Posted By: Jeff Boatright
>>>Varnishing under metal fittings is the proper procedure. Don't forget to varnishinside all bolt holes.>> >>Greg Cardinal>>>----- Original Message ----- >>From: catdesigns(at)att.net >>To: pietenpol-list(at)matronics.com >>Sent: Thursday, January 28, 2010 1:52 AM>>Subject: Pietenpol-List: Wing>> >>For all you wing builders, I am planing on building my wings (3-piece) completelythen take the fittings off to varnish the wood. Is this ok or is this goingto screw something up?>> >>Chris>Sacramento, CA>WestCoastPiet.com href="http://www.matronics.com/Navigator?Piet ... nics.com/c " target=_blank rel=nofollow>http://www.matronics.com/Navigator?Piet ... s.comblank rel=nofollow>http://www.matronics.com/contribution >________________________________________________________________________________Date: Thu, 28 Jan 2010 11:07:08 -0500
>>>Varnishing under metal fittings is the proper procedure. Don't forget to varnishinside all bolt holes.>> >>Greg Cardinal>>>----- Original Message ----- >>From: catdesigns(at)att.net >>To: pietenpol-list(at)matronics.com >>Sent: Thursday, January 28, 2010 1:52 AM>>Subject: Pietenpol-List: Wing>> >>For all you wing builders, I am planing on building my wings (3-piece) completelythen take the fittings off to varnish the wood. Is this ok or is this goingto screw something up?>> >>Chris>Sacramento, CA>WestCoastPiet.com href="http://www.matronics.com/Navigator?Piet ... nics.com/c " target=_blank rel=nofollow>http://www.matronics.com/Navigator?Piet ... s.comblank rel=nofollow>http://www.matronics.com/contribution >________________________________________________________________________________Date: Thu, 28 Jan 2010 11:07:08 -0500
>> Pietenpol-List: Wing
Original Posted By: brian.e.jardine@l-3com.com
>>>>>>Varnishing under metal fittings is the proper >>procedure. Don't forget to varnish inside all >>bolt holes.> >>>>>>>Greg Cardinal>>>>>>----- Original Message ----->>>>From: catdesigns(at)att.net>>>>To: pietenpol-list(at)matronics.com>>>>Sent: Thursday, January 28, 2010 1:52 AM>>>>Subject: Pietenpol-List: Wing>>>>>>>>For all you wing builders, I am planing on >>building my wings (3-piece) completely then >>take the fittings off to varnish the wood. Is >>this ok or is this going to screw something up?>>>>>>>>Chris>>Sacramento, CA>>WestCoastPiet.com >>href="http://www.matronics.com/Navigator?Piet ... nics.com/c >>" target=_blank >>rel=nofollow>http://www.matronics.com/Navigator?Piet ... s.comblank >>rel=nofollow>http://www.matronics.com/contribution >>>font-size:10.0pt;color:black; >>Subscription,>font-size:10.0pt;color:black; >>more:http://www.matronics.com/Navigator?Piet ... ist>style=" >>font-size:10.0pt;color:black;="================>style=" font-size:10.0pt;color:black; >>Forums!http://forums.matronics.com>font-size:10.0pt;color:black;="================>style=" font-size:10.0pt;color:black; >>support!http://www.matronics.com/contribution>> ... __________
>>>>>>Varnishing under metal fittings is the proper >>procedure. Don't forget to varnish inside all >>bolt holes.> >>>>>>>Greg Cardinal>>>>>>----- Original Message ----->>>>From: catdesigns(at)att.net>>>>To: pietenpol-list(at)matronics.com>>>>Sent: Thursday, January 28, 2010 1:52 AM>>>>Subject: Pietenpol-List: Wing>>>>>>>>For all you wing builders, I am planing on >>building my wings (3-piece) completely then >>take the fittings off to varnish the wood. Is >>this ok or is this going to screw something up?>>>>>>>>Chris>>Sacramento, CA>>WestCoastPiet.com >>href="http://www.matronics.com/Navigator?Piet ... nics.com/c >>" target=_blank >>rel=nofollow>http://www.matronics.com/Navigator?Piet ... s.comblank >>rel=nofollow>http://www.matronics.com/contribution >>>font-size:10.0pt;color:black; >>Subscription,>font-size:10.0pt;color:black; >>more:http://www.matronics.com/Navigator?Piet ... ist>style=" >>font-size:10.0pt;color:black;="================>style=" font-size:10.0pt;color:black; >>Forums!http://forums.matronics.com>font-size:10.0pt;color:black;="================>style=" font-size:10.0pt;color:black; >>support!http://www.matronics.com/contribution>> ... __________
>> Pietenpol-List: Wing
Original Posted By: Oscar Zuniga
>>>>>>Varnishing under metal fittings is the proper >>procedure. Don't forget to varnish inside all >>bolt holes.> >>>>>>>Greg Cardinal>>>>>>----- Original Message ----->>>>From: catdesigns(at)att.net>>>>To: pietenpol-list(at)matronics.com>>>>Sent: Thursday, January 28, 2010 1:52 AM>>>>Subject: Pietenpol-List: Wing>>>>>>>>For all you wing builders, I am planing on >>building my wings (3-piece) completely then >>take the fittings off to varnish the wood. Is >>this ok or is this going to screw something up?>>>>>>>>Chris>>Sacramento, CA>>WestCoastPiet.com >>href="http://www.matronics.com/Navigator?Piet ... nics.com/c >>" target=_blank >>rel=nofollow>http://www.matronics.com/Navigator?Piet ... s.comblank >>rel=nofollow>http://www.matronics.com/contribution >>>font-size:10.0pt;color:black; >>Subscription,>font-size:10.0pt;color:black; >>more:http://www.matronics.com/Navigator?Piet ... ist>style=" >>font-size:10.0pt;color:black;="================>style=" font-size:10.0pt;color:black; >>Forums!http://forums.matronics.com>font-size:10.0pt;color:black;="================>style=" font-size:10.0pt;color:black; >>support!http://www.matronics.com/contribution>> ... __________
>>>>>>Varnishing under metal fittings is the proper >>procedure. Don't forget to varnish inside all >>bolt holes.> >>>>>>>Greg Cardinal>>>>>>----- Original Message ----->>>>From: catdesigns(at)att.net>>>>To: pietenpol-list(at)matronics.com>>>>Sent: Thursday, January 28, 2010 1:52 AM>>>>Subject: Pietenpol-List: Wing>>>>>>>>For all you wing builders, I am planing on >>building my wings (3-piece) completely then >>take the fittings off to varnish the wood. Is >>this ok or is this going to screw something up?>>>>>>>>Chris>>Sacramento, CA>>WestCoastPiet.com >>href="http://www.matronics.com/Navigator?Piet ... nics.com/c >>" target=_blank >>rel=nofollow>http://www.matronics.com/Navigator?Piet ... s.comblank >>rel=nofollow>http://www.matronics.com/contribution >>>font-size:10.0pt;color:black; >>Subscription,>font-size:10.0pt;color:black; >>more:http://www.matronics.com/Navigator?Piet ... ist>style=" >>font-size:10.0pt;color:black;="================>style=" font-size:10.0pt;color:black; >>Forums!http://forums.matronics.com>font-size:10.0pt;color:black;="================>style=" font-size:10.0pt;color:black; >>support!http://www.matronics.com/contribution>> ... __________
>> Re: Pietenpol-List: Wing
Original Posted By:>> catdesigns(at)att.net
>>>>>> Varnishing under metal fittings is the proper procedure. Don't >> forget to varnish inside all bolt holes.>>>>>>>> Greg Cardinal>>>>>> ----- Original Message ----->>
>>>>>> Varnishing under metal fittings is the proper procedure. Don't >> forget to varnish inside all bolt holes.>>>>>>>> Greg Cardinal>>>>>> ----- Original Message ----->>