Pietenpol-List: Wheel source
Posted: Fri Jun 26, 1998 12:08 pm
Original Posted By: Alan Swanson
Quite a while ago, someone asked me about the wheel in this photograph: http://207.140.1.221/w3builder/piet/aci ... el.jpgHere is what info I have found (thanks to Everett Millett):Supplier: Leading Edge Airfoils. Website: http://www.leadingedge-airfoils.com/Specs: 24" wheels with brakes use with Jenny kit. Requirements: a 7/8" x 188 chromoly steel tube for axle. (ordered Cost: $275 per set.Hope this helps someone!RichardPietenpol Builder in Portland, MEhttp://www.wrld.com/w3builder_________________ ... __________
Quite a while ago, someone asked me about the wheel in this photograph: http://207.140.1.221/w3builder/piet/aci ... el.jpgHere is what info I have found (thanks to Everett Millett):Supplier: Leading Edge Airfoils. Website: http://www.leadingedge-airfoils.com/Specs: 24" wheels with brakes use with Jenny kit. Requirements: a 7/8" x 188 chromoly steel tube for axle. (ordered Cost: $275 per set.Hope this helps someone!RichardPietenpol Builder in Portland, MEhttp://www.wrld.com/w3builder_________________ ... __________