Pietenpol-List: carb heat

matronics · Post by **matronics** » Wed Mar 03, 1999 8:46 am

Original Posted By: Michael D Cuy
I have 6 inch exhaust stacks on my C-85-12. I was wondering how tofabricate a heat exchanger for some heat for my carb. Anybody got anysuggestions. 6 inches of exhaust stack isn't a lot to work with. jas________________________________________________________________________________

matronics · Post by **matronics** » Sun May 06, 2001 11:00 am

Original Posted By: Isablcorky(at)aol.com
Subject: Re: Pietenpol-List:carb heatPieters, I just built my exhaust stacks and am wondering about carb heat. Back in the 60s I built a Cassutt and it just had "J" stacks so I got my carb heat with a 2 inch tube under the cylinder barrels. It had a C 90 and I remember I had a tach drop of 50 or more and never had any problem. Now that I am "alittle' older I worry a little more. Anybody have any comments. PS I think Corky is headed for Columbia with that fuel load. If he ask about speed mods. and armor plate We will know.________________________________________________________________________________

matronics · Post by **matronics** » Wed Feb 10, 2010 12:42 pm

Original Posted By: "Dave Abramson"
Jeff; now that I see the pic you posted, Iunderstand... we have different exhaustsetups entirely. Just the same, the picturesof mine are here:http://www.flysquirrel.net/piets/engine ... .htmlOscar ZunigaAir Camper NX41CCSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net ________________________________________________________________________________