Pietenpol-List: Re: Know where to steal good ideas...
Posted: Sun Mar 07, 1999 4:38 pm
Original Posted By: Earl Myers
Hi All!Found a good article in the March/April 1999 "WoodenBoat" ( I had gottenthat issue for an article on making a 7" smoothing wood plane & discoveredthe other article!!
-- it was a product review on Aerodux 500resorcinol glue for boats.Compared to the US resorcinol glues, this product can be used as low as 45degrees F & with glue joints up to 1/16 inch. There are (3) speeds (!)ranging from 15 min to 2 hrs (at 90 degrees F). This should be a product to watch!! The only down side is there is nodistributor in the US! (it has used in England for the past 30 years) Itcould be available by the time I get to any major wood work!! ;-)Mike ConklingPretty Prairie, KS________________________________________________________________________________
Hi All!Found a good article in the March/April 1999 "WoodenBoat" ( I had gottenthat issue for an article on making a 7" smoothing wood plane & discoveredthe other article!!
-- it was a product review on Aerodux 500resorcinol glue for boats.Compared to the US resorcinol glues, this product can be used as low as 45degrees F & with glue joints up to 1/16 inch. There are (3) speeds (!)ranging from 15 min to 2 hrs (at 90 degrees F). This should be a product to watch!! The only down side is there is nodistributor in the US! (it has used in England for the past 30 years) Itcould be available by the time I get to any major wood work!! ;-)Mike ConklingPretty Prairie, KS________________________________________________________________________________