Pietenpol-List: PVC clamps saved the day
Posted: Sat Sep 11, 1999 12:22 pm
Original Posted By: Michael Brusilow
Mike,Just dug up your old post on clamps from June. Read and passed it overas "probably won't use it".For the last few days been trying to figure the best clamping method forribs to spars. No matter what I tried didn't fit. Then thought of thePVC thing. Only had 2", so cut them about 3/8" wide, and they workedgreat. Since all the prep was done, only took a couple of hours to glueribs/spar. (one wing only)Now on to tip bow.walt -----Original Message-----
Mike,Just dug up your old post on clamps from June. Read and passed it overas "probably won't use it".For the last few days been trying to figure the best clamping method forribs to spars. No matter what I tried didn't fit. Then thought of thePVC thing. Only had 2", so cut them about 3/8" wide, and they workedgreat. Since all the prep was done, only took a couple of hours to glueribs/spar. (one wing only)Now on to tip bow.walt -----Original Message-----