Brodhead Pietenpol Association

Original Posted By: Gary Gower
>Small Chev Alum V8 would work fine.>>Gordon>The V8 conversion plans by Steve Witman (now sold by Aircraft Spruce & Spec)probably will work...SaludosGary Gower________________________________________________________________________________

Original Posted By: "Jim Markle"
Wow, thanks for all the feedback on my hinge project! I just love learningnew skills, especially when I'm helped along the way with such great input!I actually figured out a way to do an extremely straight cut with my recipsaw. But I will go ahead and order a variable speed bandsaw similar to theone Kirk Huizenga noted. (Harbor Freight $99) I'll assume that Kirk's tryoutof the saw (today?) will be successful!The holes I drilled in the hinges were horrible! So I picked up some reamersand WOW, that's the ticket! Yes, this is probably old news to most of you,but I just figured it out and what a job those things do! If I'm not carefulI just might turn into a real machinist! Nah....Thanks again for ALL the input! Now back to assembling rudder parts.....Jim in Plano, TXNX25JMSign Up for Juno Platinum Internet Access TodayOnly $9.95 per month!Visit www.juno.com________________________________________________________________________________Date: Fri, 01 Nov 2002 15:59:42 -0500

Original Posted By: catdesigns(at)juno.com
Subject: Re:Pietenpol-List: Now about those hinges!!

Original Posted By: "Ted Brousseau"
Got all four cabanes installed today. Thanks to those who provided meadvice on what to do about my edge clearance issues.check the latest entry for pics.http://www.imagedv.com/aircamper/log/GN1-log-003.htmDJ VeghN74DVwww.raptoronline.comMesa, AZThis email has been scanned for known viruses and made safe for viewing by HalfPrice Hosting, a leading email and web hosting provider. For more informationon an anti-virus email solution, visit .________________________________________________________________________________