Page 1 of 1
Pietenpol-List: Steves fabric.
Posted: Tue Jan 18, 2000 4:12 pm
by matronics
Original Posted By: Patcoolnet(at)aol.com
Subject: Pietenpol-List: Steves fabric.Can yall tell me what kind of fabric Steve Eldredge used to cover hisaircamper??ThanksSteveSteve W GN-1 builderIHA #6________________________________________________________________________________
RE: Pietenpol-List: Steves fabric.
Posted: Tue Jan 18, 2000 4:43 pm
by matronics
Original Posted By: owner-pietenpol-list-server(at)matronics.com
I'm still here. I used the 1.7oz generic dacron from As&S. It was about$3.65 a yard. I used the generic tapes, and poly fiber products to glue itdown. rib stitching was with round cord, not flat.Steve E.-----Original Message-----
Pietenpol-List: Steves fabric.
Posted: Tue Jan 18, 2000 4:45 pm
by matronics
Original Posted By: Jerry Bray
Re: Pietenpol-List: Steves fabric.
Posted: Wed Jan 19, 2000 11:44 am
by matronics
Original Posted By:> owner-pietenpol-list-server(at)matronics.com
Subject: Re: Pietenpol-List: Steves fabric.Steve:Please tell me how much fabric you wouned up using. Steve> > I'm still here. I used the 1.7oz generic dacron from As&S. It was > about> $3.65 a yard. I used the generic tapes, and poly fiber products to > glue it> down. rib stitching was with round cord, not flat.> > Steve E.> > -----Original Message-----
RE: Pietenpol-List: Steves fabric.
Posted: Wed Jan 19, 2000 12:43 pm
by matronics
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Hmmm. That is a harder question. I started the rudder with some leftoversfrom another project and ordered fabric, tapes, and other supplies at leasttwice. I think I ended up using just under 30 yards of 60" fabric. Didn'tkeep track of how much of each size of tape, but 2" was the most common.Rough guess would be 4-5 rolls of 2", 1-2 rolls of 1", 1-2 rolls of 3" and aroll of 4" for the LE. Murphy got the best of me several times supplieswise, when I'd just run out near the end of the job.Steve E.-----Original Message-----