Page 1 of 1

Pietenpol-List: Pietenpol Varnish

Posted: Thu Jun 01, 2000 9:05 am
by matronics
Original Posted By: Steve Eldredge
Subject: Pietenpol-List: Pietenpol VarnishHey GuysJust wondering what would be the best varnish to use on the airframe is there one thats best should I use two part epoxy varnish or what.Gary New Orleans________________________________________________________________________________

Re: Pietenpol-List: Pietenpol Varnish

Posted: Thu Jun 01, 2000 12:33 pm
by matronics
Original Posted By: Ken Beanlands

Re: Pietenpol-List: Pietenpol Varnish

Posted: Fri Jun 02, 2000 12:18 am
by matronics
Original Posted By: Gary Gower
Subject: Re: Pietenpol-List: Pietenpol VarnishIn a message dated 6/1/00 9:06:50 AM Central Daylight Time, Flite407(at)aol.com writes:>We used 'Ace' Oil Based Spar Varnish - Clear Gloss, p/n ACE 16375, for the entire airframe. It took about 5 qts. for the wing, and maybe 3 qts for the fuselage, to apply two brushed coats. Chuck GantzerWichita________________________________________________________________________________Date: Fri, 2 Jun 2000 07:52:41 -0700 (PDT)

Re: Pietenpol-List: Pietenpol Varnish

Posted: Fri Jun 02, 2000 1:34 pm
by matronics
Original Posted By: dpilot