Pietenpol-List: CG/ 65 Continentals

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: CG/ 65 Continentals

Post by matronics »

Original Posted By: Merrill
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: CG/ 65 Continentals

Post by matronics »

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Not quite 6 inches. I am at 4.75". My flying weight is 225#. I have acustom lenght fuse (about 6in longer than the short fuse) and an extendedmotor mount of about 12" from firwall to back of engine. I also added 20#of lead ahead of the firewall to make sure I always stayed ahead of the rearCG. I balance as is at about 18" from LE. Empty weight is 626#. I couldshave a few pounds from the tailwheel, but I'm not going to remove mycheater lead until I loose some girth --My own motivation.steve (doesn't look it) E.-----Original Message-----
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: CG/ 65 Continentals

Post by matronics »

Original Posted By: "Michael Brusilow"
Subtract 20# of lead, and you have a 606# Doug Fir Piet, attaboy Steve!Gary________________________________________________________________________________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: CG/ 65 Continentals

Post by matronics »

Original Posted By: owner-pietenpol-list-server(at)matronics.com
That part is easy.Its subtracting 20-30# of lead from my butt that is more difficult :)Steve (I like too much chocolate) E.-----Original Message-----
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: CG/ 65 Continentals

Post by matronics »

Original Posted By: shad bell
Locked