Pietenpol-List: Re: BPA Newsletter Copies
Posted: Thu Mar 22, 2001 7:42 pm
Original Posted By: "Mike Bell"
Subject: Re: Pietenpol-List: landing gear In a message dated 3/21/01 10:01:58 PM Pacific Standard Time, javcr(at)yahoo.com writes:> Hello Piets> I almost finish the landing gear, but i have a> problem with the wheels, the plans call for 2 degrees> with the struts closed, my wheels are about 1 and 2> degrees, that is about 3/16inch wrong on the upper> part of the tires , i have been checking all , all is> ok, except the axles, so, with your experience what do> you think, i have to cut and reweld the axles?, or can> i let with this mistake?> Thanks for your comments.> Saludos desde Mexico> > > What kind of wheels do you have? spoke or balloon. It is probably better to live with the one degree difference than to try reworking. Doug Bryant________________________________________________________________________________Subject: Pietenpol-List: Re: BPA Newsletter Copies
Subject: Re: Pietenpol-List: landing gear In a message dated 3/21/01 10:01:58 PM Pacific Standard Time, javcr(at)yahoo.com writes:> Hello Piets> I almost finish the landing gear, but i have a> problem with the wheels, the plans call for 2 degrees> with the struts closed, my wheels are about 1 and 2> degrees, that is about 3/16inch wrong on the upper> part of the tires , i have been checking all , all is> ok, except the axles, so, with your experience what do> you think, i have to cut and reweld the axles?, or can> i let with this mistake?> Thanks for your comments.> Saludos desde Mexico> > > What kind of wheels do you have? spoke or balloon. It is probably better to live with the one degree difference than to try reworking. Doug Bryant________________________________________________________________________________Subject: Pietenpol-List: Re: BPA Newsletter Copies