Brodhead Pietenpol Association

Original Posted By: KGardner(at)odu.edu
Subject: Re: Pietenpol-List: Rod endsIn a message dated 6/7/01 9:10:32 AM Pacific Daylight Time, lnawms(at)msn.com writes:> Any tips on alternate end fittings besides what's on the plans? I would l> iketo do it that way but to make adjustments, a new end fitting has to b> e madeand that seems like a pain.> > Larry,Set up the aircraft, cabane struts, and wing until you are satisfied it is correct. Next, make wooden tooling struts from 1X3's, double check. Finally, use the tooling struts to drill the correct spacing on the real struts and you won't need to make adjustments. I've done three this way. It's easy. Doug Bryant ________________________________________________________________________________Subject: Pietenpol-List: EAA Va. State Fly-in

Original Posted By: Michael D Cuy
06/08/2001 10:11:21 AMHi List,Anyone going to the EAA State fly-in at Petersburg this weekend - I'll bethere on Sunday if anyone wants to catch up & talk Piets or whatever. I'llcheck in at the EAA volunteer tent. Anyone who wants to coordinatebeforehand, send me mail offline at this address or at .I need to check the Fly-in web site later today ofor the schedule, etc.Cheers!Kip Gardner (slowly house-painting my way out of Va.)Dept. of Ocean, Earth & Atmos. SciencesOld Dominion UniversityNorfolk, VA 23529Ph: 757-683-5654Bumper Sticker of the Week:"Illiterate? Write for Free Help Now!"(An 'oldie' from the 60's sent by a friend)________________________________________________________________________________Date: Fri, 08 Jun 2001 11:44:23 -0400