Pietenpol-List: Re: C65 broken ring
Posted: Fri Sep 07, 2001 10:07 pm
Original Posted By: Craig Lawler
Subject: Re: Pietenpol-List: proper to post pics?>>I don't allow direct posting of enclosures to the Lists because of the>danger of spreading computer v*ruses to so many people. I do offer a free>FTP archive for photos, however. Simply email your photos to:>> pictures(at)matronics.com>>and include a description message that I will forward on to the List with>the URLs of the pictures. For example, in your case Chris, simple send>your email message below to the email address above instead of the List. I>will upload each of the photos to the Matronics FTP server, then forward>your text message to the List with the FTP links for each photo included.>>Best regards,>>Matt Dralle>Matronics Email List Admin.>>=================>>At 12:31 AM 9/8/01 Saturday, you wrote:>>>>>>Attached are some general pictures as to how far along I am>>>>Photograph One: Wing ribs. I have a detailed how I built it picture of>>the jig if you want. and description of how I build the ribs (no nails or>>staples)>>>>Photograph two: Is my tail section (and my table saw). I have a cool way>>of cutting the recesses for the Vi Capler hinges. Worked out perfect>>every time (Famous last words but honestly it did). I did not use any>>nails building the tail>>>>Photograph three: Is a side view of the fuselage. I am working on the>>turtle deck formers right now. I did not put the sides on yet. I have>>some construction pictures as well.>>>>Photograph four: The template I used to get the back lined up.>>>>Photograph five: The back seat>>>>Photograph six: I made a baggage door in the head rest and the seat back>>folds down>>>>Photograph seven: I made the seat back double thick and made the notch>>to KEY it into the side. Hopefully it will work. I can take better>>pictures.>>>>Any thing in particular you want to see? I can photograph it if I have>>gotten that far. I can also scan in some of my HOW I BUILT THIS PART>>pictures as well.>>>>Chris>>Sacramento, CA>>>>>>>Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551>925-606-1001 V | 925-606-6281 F | dralle(at)matronics.com Email>http://www.matronics.com/ WWW | Featuring Products For Aircraft>> Great minds discuss ideas,> Average minds discuss events,> Small minds discuss people...>>________________________________________________________________________________Date: Sat, 08 Sep 2001 21:31:12 -0400Subject: Pietenpol-List: Re: C65 broken ring
Subject: Re: Pietenpol-List: proper to post pics?>>I don't allow direct posting of enclosures to the Lists because of the>danger of spreading computer v*ruses to so many people. I do offer a free>FTP archive for photos, however. Simply email your photos to:>> pictures(at)matronics.com>>and include a description message that I will forward on to the List with>the URLs of the pictures. For example, in your case Chris, simple send>your email message below to the email address above instead of the List. I>will upload each of the photos to the Matronics FTP server, then forward>your text message to the List with the FTP links for each photo included.>>Best regards,>>Matt Dralle>Matronics Email List Admin.>>=================>>At 12:31 AM 9/8/01 Saturday, you wrote:>>>>>>Attached are some general pictures as to how far along I am>>>>Photograph One: Wing ribs. I have a detailed how I built it picture of>>the jig if you want. and description of how I build the ribs (no nails or>>staples)>>>>Photograph two: Is my tail section (and my table saw). I have a cool way>>of cutting the recesses for the Vi Capler hinges. Worked out perfect>>every time (Famous last words but honestly it did). I did not use any>>nails building the tail>>>>Photograph three: Is a side view of the fuselage. I am working on the>>turtle deck formers right now. I did not put the sides on yet. I have>>some construction pictures as well.>>>>Photograph four: The template I used to get the back lined up.>>>>Photograph five: The back seat>>>>Photograph six: I made a baggage door in the head rest and the seat back>>folds down>>>>Photograph seven: I made the seat back double thick and made the notch>>to KEY it into the side. Hopefully it will work. I can take better>>pictures.>>>>Any thing in particular you want to see? I can photograph it if I have>>gotten that far. I can also scan in some of my HOW I BUILT THIS PART>>pictures as well.>>>>Chris>>Sacramento, CA>>>>>>>Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551>925-606-1001 V | 925-606-6281 F | dralle(at)matronics.com Email>http://www.matronics.com/ WWW | Featuring Products For Aircraft>> Great minds discuss ideas,> Average minds discuss events,> Small minds discuss people...>>________________________________________________________________________________Date: Sat, 08 Sep 2001 21:31:12 -0400Subject: Pietenpol-List: Re: C65 broken ring