Pietenpol-List: wood question- saw tuneup
Posted: Sun Nov 18, 2001 4:11 pm
Original Posted By: del magsam
del magsam wrote :>I used a 1/8 inch plex about 2ft square.Dumb question here, Del. You say 'plex'. Do you mean "plexiglas", or is 'plex' something else that I am not familiar with? This sounds like a great accessory. I have been cutting my small pieces with a chop saw, but even that gets a bit dicey when the pieces are small and the cut is angled. Your sliding table would make it easy to do small pieces.Oscar ZunigaMedford, Oregonmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________Date: Sun, 18 Nov 2001 16:25:20 -0800 (PST)
del magsam wrote :>I used a 1/8 inch plex about 2ft square.Dumb question here, Del. You say 'plex'. Do you mean "plexiglas", or is 'plex' something else that I am not familiar with? This sounds like a great accessory. I have been cutting my small pieces with a chop saw, but even that gets a bit dicey when the pieces are small and the cut is angled. Your sliding table would make it easy to do small pieces.Oscar ZunigaMedford, Oregonmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________Date: Sun, 18 Nov 2001 16:25:20 -0800 (PST)