Pietenpol-List: Table first
Posted: Wed Nov 28, 2001 11:49 am
Original Posted By: "Joe Krzes"
When I first started, after receiving the plans and manual guide thatDon sells, I built a 16'x4' level table.Then I started on the fuse first as Bernie suggested as everything hangsoff of it. I also purchased my engine at the same time so I would notget burned out working on just one part. It's worked out really well forme. As I would fabricate different parts, landing gear, motor mounts,brackets, tailfeathers, etc,I could attach them and make sure that they fit. The fuse for me hasbeen the neverending part of thepiet journey. I'm still doing things to it as I get closer to covering.One big thing I did learn was don't put a due date on the project, justbuild and enjoy till it's done.CarlPlease visit my latest piet page atwww.megsinet.net/skycarl/pietpage12.html________________________________________________________________________________
When I first started, after receiving the plans and manual guide thatDon sells, I built a 16'x4' level table.Then I started on the fuse first as Bernie suggested as everything hangsoff of it. I also purchased my engine at the same time so I would notget burned out working on just one part. It's worked out really well forme. As I would fabricate different parts, landing gear, motor mounts,brackets, tailfeathers, etc,I could attach them and make sure that they fit. The fuse for me hasbeen the neverending part of thepiet journey. I'm still doing things to it as I get closer to covering.One big thing I did learn was don't put a due date on the project, justbuild and enjoy till it's done.CarlPlease visit my latest piet page atwww.megsinet.net/skycarl/pietpage12.html________________________________________________________________________________