Original Posted By: Kent Hallsten
"Michael Conkling" wrote:>If you go to www.aircamper.no-ip.com>go down about 3/4 the way to a file called pietenpol.dwgAha! Once again the value of this list (and the websites) proves out! I was going to draw this up in AutoCAD one rainy Saturday, but now all I have to do is plot it and spend a little time over the dining room table with a ruler to check it out. Excellent!BTW- there is lots of other good stuff on this site. A guy could spend lots of time browsing through the images and other good stuff there...Oscar ZunigaMedford, Oregonmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________
Pietenpol-List: full size rib drawing
RE: Pietenpol-List: full size rib drawing
Original Posted By: Tim
Must be nice to have AutoCAD, I can't seem to open it. I downloaded aprogram called Volo View Express that at least will let me view it, but itwon't allow full size printing. Any suggestions software wise?? (freedownload?) Anyway.... last night I stretched a tight thread on my jig and laida coat of Helmsman spar polyurethane over it. I'll get this drawn out thisweekend. Isn't Helmsman spar polyurethane what some have used to seal thewood? I'm a long way from having to do this but it cost 10 bucks and I'dlike to use it up. Kent>If you go to www.aircamper.no-ip.com>go down about 3/4 the way to a file called pietenpol.dwgAha! Once again the value of this list (and the websites) proves out! I was going to draw this up in AutoCAD one rainy Saturday, but now all I have to do is plot it and spend a little time over the dining room table with a ruler to check it out. Excellent!BTW- there is lots of other good stuff on this site. A guy could spend lotsof time browsing through the images and other good stuff there...Oscar ZunigaMedford, Oregonmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________Date: Fri, 04 Jan 2002 09:02:41 -0600
Must be nice to have AutoCAD, I can't seem to open it. I downloaded aprogram called Volo View Express that at least will let me view it, but itwon't allow full size printing. Any suggestions software wise?? (freedownload?) Anyway.... last night I stretched a tight thread on my jig and laida coat of Helmsman spar polyurethane over it. I'll get this drawn out thisweekend. Isn't Helmsman spar polyurethane what some have used to seal thewood? I'm a long way from having to do this but it cost 10 bucks and I'dlike to use it up. Kent>If you go to www.aircamper.no-ip.com>go down about 3/4 the way to a file called pietenpol.dwgAha! Once again the value of this list (and the websites) proves out! I was going to draw this up in AutoCAD one rainy Saturday, but now all I have to do is plot it and spend a little time over the dining room table with a ruler to check it out. Excellent!BTW- there is lots of other good stuff on this site. A guy could spend lotsof time browsing through the images and other good stuff there...Oscar ZunigaMedford, Oregonmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________Date: Fri, 04 Jan 2002 09:02:41 -0600