Pietenpol-List: AFS Cecobond

[matronics]

Original Posted By: mark boynton
Does anyone have any experience with Aircraft Finishing systems products? From looking in their web site it looks like they use non-MEK,water based cements and sealers. They claim their cement can go over one part polyurethane sealer, no mention of having to coat glue surfaces with epoxy varnish and paint. No hazardous fumes or solvents and (if I'm reading it right) no worry about the solvents in the cement lifting emamel and varnished finishes.If I'm reading this right it sounds like a great way to go. Even if it was a little more expensive, you would save the cost and time of applying the epoxy varnish and painting metal fittings with epoxy paints. Someone on this list has brought up their products in the past. If this non-lifting thing is true and their products are as good as they claim please let me know. Thanks in advance. Ed________________________________________________________________________________Date: Thu, 21 Mar 2002 05:49:10 -0800 (PST)

[matronics]

Original Posted By: "Ed Grentzer"
There is a forum on these products put on by Blue Sky Aviation(www.blskyav.com) at Sun n Fun nearly every day. Check their website fordates and times. They told me it lasts about an hour. I'm interested also.DickG.Ft. Myers, FL----- Original Message -----