Pietenpol-List: Re: Pober wing
Posted: Sat Mar 30, 2002 4:42 am
Original Posted By: "Michael Brusilow"
Just want to add one more suggestion to the excellent ideas andencouragement already offered.If the Pober wing was built with epoxy, then a heat gun should help you indisassembly. I haven't tried this, but I know that you can separate epoxiedparts by heating them in your kitchen oven. A heat gun for removing paintwill probably produce a lot more heat than a hobby one.Mike Bell________________________________________________________________________________
Just want to add one more suggestion to the excellent ideas andencouragement already offered.If the Pober wing was built with epoxy, then a heat gun should help you indisassembly. I haven't tried this, but I know that you can separate epoxiedparts by heating them in your kitchen oven. A heat gun for removing paintwill probably produce a lot more heat than a hobby one.Mike Bell________________________________________________________________________________