Original Posted By: DonanClara(at)aol.com
Has anyone modifying the Model-A per the prints discovered that the holesfor the exhaust stack hold-down bolts penetrate through into a cavity?Hoping this is normal.Pietenpolingly,Bill Sayre________________________________________________________________________________
Pietenpol-List: Model-A exhaust studs
Re: Pietenpol-List: Model-A exhaust studs
Original Posted By: "Dick and Marge Gillespie"
Subject: Re: Pietenpol-List: Model-A exhaust studsYea Bill, my first clue was that damp stuff coming out of the water jacket !! Not to worry, just slap a little hi-temp RTV on the threads and put 'em back. Mine now has about 20 hours on it and no leaks. Don Hicks________________________________________________________________________________
Subject: Re: Pietenpol-List: Model-A exhaust studsYea Bill, my first clue was that damp stuff coming out of the water jacket !! Not to worry, just slap a little hi-temp RTV on the threads and put 'em back. Mine now has about 20 hours on it and no leaks. Don Hicks________________________________________________________________________________