Page 1 of 1
Pietenpol-List: Keri Price fuel tank
Posted: Thu Aug 15, 2002 6:05 pm
by matronics
Original Posted By: "Brants"
Subject: Pietenpol-List: Keri Price fuel tankGeorge: I built the Price fuel tank, and your right, it was a ton ofwork. Leon S.________________________________________________________________________________Date: Thu, 15 Aug 2002 21:38:36 -0500
RE: Pietenpol-List: rib stitching debacle
Posted: Thu Aug 15, 2002 9:39 pm
by matronics
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Gene,I know the pressure inside the wing (and in the fuselage) of my tcraft waslower than ambient. I learned this years ago when I had a static leak inthe wing and I did a lot of tests with the altimeter and airspeed withvarious hookups and static placements. I imagine that the pressure on topof the wing is lowest, the bottom the highest, and inside it is somewhere inbetween. That would still cause the top surface to ballon.chris-----Original Message-----
Re: Pietenpol-List: rib stitching debacle
Posted: Thu Aug 15, 2002 10:11 pm
by matronics
Original Posted By: "Brants"
Re: Pietenpol-List: photos of my project
Posted: Thu Aug 15, 2002 10:21 pm
by matronics
Original Posted By: del magsam
Subject: Re: Pietenpol-List: photos of my projectIn a message dated 8/15/02 10:12:25 PM Central Daylight Time, tmbrant(at)uswest.net writes:>
http://public.fotki.com/tab1324/pietenpol_construction/> LOOKIN GOOD!!!!!!!!________________________________________________________________________________Date: Thu, 15 Aug 2002 21:04:42 -0700 (PDT)