Page 1 of 1
Pietenpol-List: DXF Pietenpol Drawings
Posted: Mon Dec 09, 2002 3:11 pm
by matronics
Original Posted By: "Gary McNeel, Jr."
RE: Pietenpol-List: DXF Pietenpol Drawings
Posted: Mon Dec 09, 2002 3:37 pm
by matronics
Original Posted By: "Kent Hallsten"
RE: Pietenpol-List: DXF Pietenpol Drawings
Posted: Mon Dec 09, 2002 3:37 pm
by matronics
Original Posted By: Gary McNeel, Jr. [mailto:gmcneel(at)mykitplane.com]
I also would like one, please. Thanks Kent Hallsten pietbuilder(at)yahoo.com -----Original Message-----
Pietenpol-List: DXF Pietenpol Drawings
Posted: Mon Dec 09, 2002 3:38 pm
by matronics
Original Posted By: Chris
Pietenpol-List: Airfoil
Posted: Mon Dec 09, 2002 3:38 pm
by matronics
Original Posted By: "Carl Loar"
Does anyone know what Airfoil the Air camper uses and have the data forit?--Chris Woodhouse3147 SW 127th St.Oklahoma City, OK 73170405-691-5206 (home)chrisw(at)programmer.netN35 20.492'W97 34.342'________________________________________________________________________________
Re: Pietenpol-List: DXF Pietenpol Drawings
Posted: Mon Dec 09, 2002 4:10 pm
by matronics
Original Posted By: Gary McNeel, Jr.
I have one in .3ds and lightwave formats... I thought it may have been up onyour website...if not I'll email it to ya...DJ----- Original Message -----
Re: Pietenpol-List: Airfoil
Posted: Mon Dec 09, 2002 4:11 pm
by matronics
Original Posted By: Chris
as I recall the airfoil is called an FC-10FC denotes that a drafters french curve was used.. and the 10 denotes that it tookBernie 10 minutes to draw it up....true story... other than that I have no further infoDJ Veghwww.raptoronline.com ----- Original Message -----
Re:RE: Pietenpol-List: DXF Pietenpol Drawings
Posted: Mon Dec 09, 2002 4:31 pm
by matronics
Original Posted By: catdesigns(at)juno.com
Subject: Re:RE: Pietenpol-List: DXF Pietenpol Drawings
Re:Pietenpol-List: Airfoil
Posted: Mon Dec 09, 2002 4:35 pm
by matronics
Original Posted By: catdesigns(at)juno.com
Subject: Re:Pietenpol-List: Airfoil
Re: Re:RE: Pietenpol-List: DXF Pietenpol Drawings
Posted: Mon Dec 09, 2002 8:18 pm
by matronics
Original Posted By: del magsam
I'd like a copy.Thanks.Bill - @juno.com>> I have a side view and a top view drawn in MS Paint (BMP file). It comesin Ford, Lycoming, and Corvair engine versions as well as strait and springstyle gear. If you want the file (and I can find it on my hard drive) Iwill send it to whomever wants it. It is not to scale but it looks veryclose. No 3D drawing, sorry.>> Chris> Sacramento, CA>>________________________________________________________________________________Date: Mon, 9 Dec 2002 18:20:05 -0800 (PST)