Brodhead Pietenpol Association

Original Posted By: Craig Lawler
Subject: Re: Pietenpol-List: DXF drawingsLarry,Yes, the ribs are overbuilt. Early Cub, and Chief ribs were 1/4 x 1/4. In fact the Grega GN1 can be built with either 1/4 x 1/4 or 1/4 x 1/2. But if you use 1/4 x1/4 it will not be 100% Pietenpol. Also realize that Pietenpol cut on the center cut making his ribs slightly less than 1/4 x 1/2.Dan________________________________________________________________________________Date: Tue, 31 Dec 2002 09:57:15 -0500Subject: Pietenpol-List: Re: Pietenpol-List Digest: 25 Msgs - 12/30/02

Original Posted By: "Barry Davis"
Subject: Pietenpol-List: Re: Pietenpol-List Digest: 25 Msgs - 12/30/02>>Oscar,>>I have an engine primer I will sell for $50.>>Craig clawler(at)ptd.net>>________________________________________________________________________________

Original Posted By: Craig Lawler
I bought one at the Cub Fly in a few years ago at Lockhaven, Pa for $2.00If you look around at the flea markets at the various air shows you canusually get some pretty good deals,of course, you can get ripped off just aseasy too.-----Original Message-----