Brodhead Pietenpol Association

Posted: **Fri May 02, 2003 6:54 am**

Original Posted By: "Jack Phillips"
List,What thickness of aluminum would be the best to cov er the gap between center sectionand wing? I have some .010 or .012 but seems like it might be a tad flimsy.Thanks.DickG.________________________________________________________________________________

Posted: **Fri May 02, 2003 7:48 am**

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Hi Dick,I used .016" 2024-T3 and it seems about right. That was what my Cessna 140used in this application. I bought a length of the stuff AS&S sells forleading edge material.Jack -----Original Message-----

Posted: **Fri May 02, 2003 8:14 am**

Original Posted By: "Jack Phillips"
----- Original Message -----

Brodhead Pietenpol Association

Pietenpol-List: Fairings

Pietenpol-List: Fairings

RE: Pietenpol-List: Fairings

Re: Pietenpol-List: Fairings