Pietenpol-List: more on the go gauge for nicopress
Posted: Sun Jul 13, 2003 8:08 am
Original Posted By: "Cy Galley"
DJ,I found the following dimesions in EAA Aircraft Volume One File Number 6 on AircraftHomebuilding Tips, page 34. It is an article from some early 60's issueof Sport Aviation by Kalman E. Saufnauer, EAA 1201. The drawing of the gaugeis by Stan Dzik, EAA 15.It appears that the article addresses oval sleeves only. Why the minor disparitieswith my gauge, I don't know.1/16" sleeve .190-.195" go dimension3/32" sleeve .255-.265" go dimension1/8" sleeve .343-.353" go dimension5/32" sleeve .380-.390" go dimensionChris Bobka________________________________________________________________________________
DJ,I found the following dimesions in EAA Aircraft Volume One File Number 6 on AircraftHomebuilding Tips, page 34. It is an article from some early 60's issueof Sport Aviation by Kalman E. Saufnauer, EAA 1201. The drawing of the gaugeis by Stan Dzik, EAA 15.It appears that the article addresses oval sleeves only. Why the minor disparitieswith my gauge, I don't know.1/16" sleeve .190-.195" go dimension3/32" sleeve .255-.265" go dimension1/8" sleeve .343-.353" go dimension5/32" sleeve .380-.390" go dimensionChris Bobka________________________________________________________________________________