Page 1 of 1
Pietenpol-List: Wing to Center Section Gap Covers
Posted: Sun Jul 13, 2003 6:43 pm
by matronics
Original Posted By: Isablcorky(at)aol.com
What style aluminum is generally used for these gap covers? I thought I'd usesome leftover .010 but is seems way too light.Also, thanks for the response to the W & B question and one other question I askedbefore that that I can't remember.DickG.________________________________________________________________________________
Re: Pietenpol-List: Wing to Center Section Gap Covers
Posted: Mon Jul 14, 2003 12:42 pm
by matronics
Original Posted By: "Dick and Marge Gillespie"
I got a small roll of flashing from Home Depot, cut to width on my band saw(wood blade) and screwed it on. It's really thin. Nothing flew off yetwalt evansNX140DL----- Original Message -----
Pietenpol-List: Wing to Center Section Gap Covers
Posted: Mon Jul 14, 2003 1:43 pm
by matronics
Original Posted By: Michael D Cuy
Pietenpol-List: spokes & rims
Posted: Mon Jul 14, 2003 1:43 pm
by matronics
Original Posted By: Michael D Cuy
Subject: Pietenpol-List: spokes & rimsguys--- neat site for anyone interested in wire wheels. checkout:
http://www.buchananspokes.com/aboutus.htmMike C.________________________________________________________________________________Date: Mon, 14 Jul 2003 17:54:18 -0400
RE: Pietenpol-List: spokes & rims
Posted: Mon Jul 14, 2003 2:16 pm
by matronics
Original Posted By: Michael D Cuy Michael.D.Cuy(at)grc.nasa.gov
No, if anyone is interested in wire wheels they should contact me . . .I've got two pairs, one more than I need.Gene ;)Original Message:-----------------