Page 1 of 1
Pietenpol-List: Piet Fuel tanks
Posted: Tue Nov 18, 2003 11:07 pm
by matronics
Original Posted By: "Christian Bobka"
Hi Guys,What guage aluninum are you using for the front mounted fuse fuel tank. I amabout ready to make mine up.CheersPeterWonthaggi, Australiahttp://cpc-world.cable.nu________________________________________________________________________________
Re: Pietenpol-List: standby one.......
Posted: Tue Nov 18, 2003 11:08 pm
by matronics
Original Posted By: "Michael D Cuy"
Are we to argue over how to say Whithead?Chris----- Original Message -----
Pietenpol-List: standby one.......
Posted: Wed Nov 19, 2003 7:39 am
by matronics
Original Posted By: Kip & Beth Gardner
Re: Pietenpol-List: Piet Fuel tanks
Posted: Wed Nov 19, 2003 9:40 pm
by matronics
Original Posted By: "Peter W Johnson"
I used 5052H-32 .040. It worked very well.Dick N.----- Original Message -----
RE: Pietenpol-List: Piet Fuel tanks
Posted: Thu Nov 20, 2003 12:29 am
by matronics
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Thanks Dick.Peter.-----Original Message-----
RE: Pietenpol-List: Piet Fuel tanks
Posted: Thu Nov 20, 2003 12:29 am
by matronics
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Subject: RE: Pietenpol-List: Piet Fuel tanksThanks Dick.Peter.-----Original Message-----
RE: Pietenpol-List: Piet Fuel tanks
Posted: Thu Nov 20, 2003 11:37 am
by matronics
Original Posted By: Peter W Johnson vk3eka(at)bigpond.net.au
I would recommend using 3003 aluminum .040 thick. It is cheap, easy toobtain (any sheet metal shop has it), easy to work, and is what theyoriginally would have used.GeneOriginal Message:-----------------
Pietenpol-List: Piet Fuel tanks
Posted: Thu Nov 20, 2003 11:55 am
by matronics
Original Posted By: "John Ford"