Re: Pietenpol-List: propeller for A65 - TN Propellers
Posted: Tue Apr 13, 2004 9:55 am
Original Posted By: Carbarvo(at)aol.com
mine is a Tennessee Prop. Unbelievable quality. They use 1/16" laminationswhere others use 1/2" or 3/8" I ended up with a 48 lamination prop (3" thickat the hub). This makes for a very strong and stiff prop. They also give youthe option of a clear Urethane leading edge.They will make any diameter, pitch or rotation you want in about 2 weeks... manysizes are in stock.Total cost was about $500 shipped.www.tn-prop.comDJ VeghN74DVMesa, AZwww.imagedv.com/aircamper ----- Original Message -----
mine is a Tennessee Prop. Unbelievable quality. They use 1/16" laminationswhere others use 1/2" or 3/8" I ended up with a 48 lamination prop (3" thickat the hub). This makes for a very strong and stiff prop. They also give youthe option of a clear Urethane leading edge.They will make any diameter, pitch or rotation you want in about 2 weeks... manysizes are in stock.Total cost was about $500 shipped.www.tn-prop.comDJ VeghN74DVMesa, AZwww.imagedv.com/aircamper ----- Original Message -----