Page 1 of 1
Pietenpol-List: Tolerances and T-88
Posted: Mon May 10, 2004 8:55 pm
by matronics
Original Posted By: dave rowe
I now have cut the pieces for my test stabilizer and am going to be using the T-88to put it together. My question is, how large a gap will T-88 safely fill?The largest is about 1/16th". Would T-88 safely fill a gap that large? WhenI start building to fly I will be using better tools and able to keep the tolerancesmuch tighter.________________________________________________________________________________Date: Mon, 10 May 2004 21:36:49 -0700
Re: Pietenpol-List: Tolerances and T-88
Posted: Wed May 12, 2004 11:41 pm
by matronics
Original Posted By: john e fay
I am looking for Alan James' (G-BUCO)email address. The one he used when heonce subscribed to this list does not appear to work. This is the same addressthat shows on the UK Piet website. Does anybody have another email addressfor him? Chris________________________________________________________________________________Date: Thu, 13 May 2004 00:31:40 -0500Subject: Re: Pietenpol-List: Tolerances and T-88
RE: Pietenpol-List: G-BUCO's email address
Posted: Thu May 13, 2004 2:48 am
by matronics
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Chris,Try this gbucojames(at)hotmail.comPeter.-----Original Message-----
Pietenpol-List: G-BUCO's email address
Posted: Thu May 13, 2004 7:00 am
by matronics
Original Posted By: Michael D Cuy
Pietenpol-List: G-BUCO's email address
Posted: Thu May 13, 2004 7:22 am
by matronics
Original Posted By: Jim Markle
Pietenpol-List: G-BUCO's email address
Posted: Thu May 13, 2004 2:42 pm
by matronics
Original Posted By: At7000ft(at)aol.com
Re: Pietenpol-List: Costs of Fabric Covering
Posted: Thu May 13, 2004 2:52 pm
by matronics
Original Posted By:
I hope it's ok. I built an HVLP setup and hope to use it when the timecomes!jm----- Original Message -----
RE: Pietenpol-List: Costs of Fabric Covering
Posted: Thu May 13, 2004 4:31 pm
by matronics
Original Posted By: "Steve Eldredge"