Page 1 of 1
Pietenpol-List: Suppliers for a Prop
Posted: Wed May 26, 2004 1:59 pm
by matronics
Original Posted By: "DJ Vegh"
Guys,Looking to contact a prop manufacturer for a prop to fit a Lycoming0-235, any ideas as to I can contact.ThanksNorman StapelbergSouth AfricaZS-VJA (rebuilding)________________________________________________________________________________
Re: Pietenpol-List: Suppliers for a Prop
Posted: Wed May 26, 2004 3:18 pm
by matronics
Original Posted By: Norman Stapelberg
I've been happy with my Tennesee Prop.
www.tn-prop.com One of the few wood prop makers that use 1/16" laminations. Makes for a very strong and stiff prop. Good price too... about $550 They will make any diameter or pitch combo you want.DJ----- Original Message -----
RE: Pietenpol-List: Suppliers for a Prop
Posted: Thu May 27, 2004 12:18 pm
by matronics
Original Posted By: Waytogopiet(at)aol.com
Thanks for the info I e-mailed them and will get a price from them I am sure it will be lessthan Sensinich.Thanks againNorman StapelbergSouth Africa ZS-VJA (rebuilding)I've been happy with my Tennesee Prop.
www.tn-prop.com One of the fewwood prop makers that use 1/16" laminations. Makes for a very strongand stiff prop. Good price too... about $550 They will make anydiameter or pitch combo you want.DJ________________________________________________________________________________