Brodhead Pietenpol Association

Original Posted By: Michael D Cuy

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Depends on the quality of the rebuild. Mine cost $1500 for the core, $1000to have a certified shop magnaflux and grind the crankshaft and overhaul therods and the rocker arms, $3300 for new Millenium cylinders (the old oneswere shot), $225 for a new camshaft, $550 for new cam followers, and $800for new Slick Mags, harnesses and plugs. Total, about $7500, but I knowwhat I've got, and it is really an almost brand new engine. That was withme doing the assembly (under the eyes of an A&P IA). You can do it forless. I wouldn't pay much more.Jack -----Original Message-----

Original Posted By: Rcaprd(at)aol.com
Subject: Re: Pietenpol-List: A-65 cost?In a message dated 6/1/04 1:51:44 PM Central Daylight Time, ashcan(at)earthlink.net writes:>Jim,I have over $6000 in my A65. I really like this engine, and I don't regret spending the money for it.Chuck G.________________________________________________________________________________