Brodhead Pietenpol Association

Posted: **Wed Sep 08, 2004 5:23 pm**

Original Posted By: Dennis Engelkenjohn
try Ronstan. they are from "down under" and may use metric sized parts.http://www.ronstan.com/arch/DJ ----- Original Message -----

Posted: **Wed Sep 08, 2004 5:59 pm**

Original Posted By: "DJ Vegh"
Is there anyone on the list who is from a country where metric parts are available? I have some small turnbuckles with a .150 hole in the pin end and I would liketo find some clevis pins to fit. Wicks has 1/8" pins, but they are a loosefit.Dennis________________________________________________________________________________

Brodhead Pietenpol Association

Pietenpol-List: metric clevis pins

Re: Pietenpol-List: metric clevis pins

Pietenpol-List: metric clevis pins