Page 1 of 1
Pietenpol-List: Fuel strainer mesh
Posted: Wed Sep 29, 2004 5:45 pm
by matronics
Original Posted By: "John Dilatush"
Subject: Pietenpol-List: Fuel strainer meshPieters,Would anyone know a source of fine wire mesh suitable for gascolator and carb inlet? Would appreciate a little help.Corky________________________________________________________________________________
RE: Pietenpol-List: Fuel strainer mesh
Posted: Wed Sep 29, 2004 7:36 pm
by matronics
Original Posted By:
Hi Corky I ordered mine from McMasters they have all sizes of mesh.Dale Mpls----- Original Message -----
Re: Pietenpol-List: Fuel strainer mesh
Posted: Wed Sep 29, 2004 7:41 pm
by matronics
Original Posted By: Rcaprd(at)aol.com
Subject: Re: Pietenpol-List: Fuel strainer meshThanks, I tried McMaster and couldn't bring up anything but completed fixtures. I wanted some raw material. Of course I'm not sharp, even dull, on thiscomputer.Corky________________________________________________________________________________
Re: Pietenpol-List: Fuel strainer mesh
Posted: Wed Sep 29, 2004 8:24 pm
by matronics
Original Posted By: Greg Bacon
Subject: Re: Pietenpol-List: Fuel strainer meshDale,Would you mind looking up the page for me?Corky________________________________________________________________________________Date: Wed, 29 Sep 2004 21:54:17 -0500
Re: Pietenpol-List: Fuel strainer mesh
Posted: Wed Sep 29, 2004 11:10 pm
by matronics
Original Posted By: Isablcorky(at)aol.com
Hey CorkyA boat dealer should have that screen.Dick N. ----- Original Message -----
Re: Pietenpol-List: Fuel strainer mesh
Posted: Thu Sep 30, 2004 4:23 pm
by matronics
Original Posted By:
Hi CorkyI have Catalog No 103. It's on page 218. I ordered 60 x60 Brass mesh in a 12 x12 sheet.The part no is 9223t144 for $6.82Dale in Mpls----- Original Message -----
Re: Pietenpol-List: Fuel strainer mesh
Posted: Thu Sep 30, 2004 4:56 pm
by matronics
Original Posted By: Galen Hutcheson
Re: Pietenpol-List: Fuel strainer mesh
Posted: Thu Sep 30, 2004 6:12 pm
by matronics
Original Posted By: BARNSTMR(at)aol.com
Subject: Re: Pietenpol-List: Fuel strainer meshThanks Dale, I'll get after itCorky________________________________________________________________________________Date: Fri, 01 Oct 2004 17:50:01 -0400
Re: Pietenpol-List: Fuel strainer mesh
Posted: Thu Oct 07, 2004 7:35 am
by matronics
Original Posted By: Isablcorky(at)aol.com
Subject: Re: Pietenpol-List: Fuel strainer meshCorky,How much do you need?I have some and can send you some; would a 3" or 4" square be OK?Lou Larsen________________________________________________________________________________
Re: Pietenpol-List: Fuel strainer mesh
Posted: Thu Oct 07, 2004 8:19 am
by matronics
Original Posted By: Larry Nelson
Subject: Re: Pietenpol-List: Fuel strainer meshThanks Lou,But I received a 12x12 inch piece from McMaster which should last through all my needs. Probably will be able to send you or someone else some from leftover.Corky________________________________________________________________________________Date: Thu, 7 Oct 2004 07:17:41 -0700 (PDT)