Pietenpol-List: O-ring for Matco MC5 master
Posted: Mon Feb 18, 2008 10:04 am
Original Posted By: Ryan Mueller
Can someone tell me the nomenclature/specs for the Buna-N -ring that goes on the piston (plunger) of the Matco MC5 masters? I need a new one and don't want to buy the whole Matco rebuild kit just to get a 10 cent O-ring, but I don't know the specs on it and the Matco website doesn't say. It is Item 12 on the parts diagram shown here: http://www.flysquirrel.net/piets/Matcobrake.jpgMy airplane is 200 mi. from here so I can't just go out and measure it ;o) Thanks.Oscar ZunigaAir Camper NX41CCSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________Date: Mon, 18 Feb 2008 08:39:51 -0800 (PST)
Can someone tell me the nomenclature/specs for the Buna-N -ring that goes on the piston (plunger) of the Matco MC5 masters? I need a new one and don't want to buy the whole Matco rebuild kit just to get a 10 cent O-ring, but I don't know the specs on it and the Matco website doesn't say. It is Item 12 on the parts diagram shown here: http://www.flysquirrel.net/piets/Matcobrake.jpgMy airplane is 200 mi. from here so I can't just go out and measure it ;o) Thanks.Oscar ZunigaAir Camper NX41CCSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________Date: Mon, 18 Feb 2008 08:39:51 -0800 (PST)