Brodhead Pietenpol Association

Posted: **Tue Feb 19, 2008 5:00 pm**

Original Posted By: "Glenn Thomas"
Subject: Re: Pietenpol-List:Runny glue jointsGuys,Speaking of runny glue joints, this is one area I wish I had taken more time. I have a lot of runs of epoxy that would have been easily alleviated if Ihad only taken a few more minutes to wipe away the excess. It will all be covered up, but it looks bad in the mean time. Dan HelsperPoplar Grove, IL.**************Ideas to please picky eaters. Watch video on AOL Living. (http://living.aol.com/video/how-to-plea ... 0000002598)________________________________________________________________________________Date: Tue, 19 Feb 2008 18:07:28 -0500

Posted: **Tue Feb 19, 2008 7:18 pm**

Original Posted By: HelsperSew(at)aol.com
You can use a wood burning iron or a soldering iron to melt those runs. Epoxy melts away and if you are carefull you can not leave marks. Try it in an inconspicious (sp) place. ----- Original Message -----