Page 1 of 1
Pietenpol-List: alternative airfoils
Posted: Wed Apr 02, 2008 11:27 am
by matronics
Original Posted By: Owen Davies
While I don't have the coordinates for the Riblett GA airfoil that Rob and othersmention, there was an analysis done by Mike Shuck comparing that airfoil withthe NACA 4415 and they are remarkably similar in turbulent flow regimes aswell as profiles. The NACA 4415 coordinates are readily obtainable.Oscar ZunigaSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________Date: Wed, 02 Apr 2008 12:55:29 -0400
Pietenpol-List: Re: Is anyone else having problems with the UIUC airfoils
Posted: Wed Apr 02, 2008 11:55 am
by matronics
Original Posted By: "bhassel"
>>>Oscar Zuniga wrote:>>>>>>> While I don't have the coordinates for the Riblett GA airfoil that>Rob and others mention, there was an analysis done by Mike Shuck>comparing that airfoil with the NACA 4415 and they are remarkably>similar in turbulent flow regimes as well as profiles. ...>Worth knowing! Many thanks.>>I really do need to learn more about airfoils.>>Owen>>________________________________________________________________________________Subject: Pietenpol-List: Re: Is anyone else having problems with the UIUC airfoilsdatab
Re: Pietenpol-List: alternative airfoils
Posted: Wed Apr 02, 2008 12:32 pm
by matronics
Original Posted By: Owen Davies
Re: Pietenpol-List: alternative airfoils
Posted: Wed Apr 02, 2008 7:35 pm
by matronics
Original Posted By: owen5819(at)comcast.net
Owen,I posted a spreadsheet on this list a couple of months ago giving theco-ordinates of the Riblett GA and Peitenpol sections.If you can't find it, I can send it to you.JohnW---- Original Message ----
Posted: Wed Apr 02, 2008 8:51 pm
by matronics
Original Posted By: Owen Davies
I get the first page of the web site but nothing on the database.BobSanta Fe, NMRead this topic online here:
http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 02 Apr 2008 21:50:58 -0400
Pietenpol-List: Re: Is anyone else having problems with the UIUC airfoils
Posted: Wed Apr 02, 2008 8:58 pm
by matronics
Original Posted By: "Ric Ryburn"
I'm guessing the site is in a state of flux. The link that you referenced givesme a UofI Champaign-Urbana Aerospace engineer web page with the message thatthe page I was looking for was not found (404).Everything I try ends with out a positive result.Bob Santa Fe, NMRead this topic online here:
http://forums.matronics.com/viewtopic.p ... __________
RE: Pietenpol-List: Re: Is anyone else having problems with the UIUC airfoils
Posted: Wed Apr 02, 2008 11:38 pm
by matronics
Original Posted By: "Rob Stapleton, Jr."
For me, at this point, everything seems to work fine.Ric________________________________________________________________________________