Brodhead Pietenpol Association

Original Posted By: "walt evans"
I measured mine today and they are 9" high and 16" wide on the curve, and mounted at a ~45 degree angle. The size came from experimenting with my hand around the edges of my motorcycle windshield at 65mph.--Jim Lagowski-- cabanes and center section of the wing installed today________________________________________________________________________________Date: Wed, 04 Jun 2008 04:58:46 -0400

Original Posted By: "jimd"
Jim. If you would like one send me your address and I'll send you the pattern off of mine, if I have time before I leave sunday. It may or may not be what your looking for but it could be a good start. I'm happy with it but that doesn't mean you will be. As far as mounting, it is mounted using 4 angled braces attached to the combing.Gene----- Original Message -----