Page 1 of 1
Re: Pietenpol-List: Re: Barber Field Fly-In
Posted: Mon Jan 06, 2003 4:55 pm
by matronics
Original Posted By: shad bell
Shad,Current plans are to leave Hales Landing tomorrow morning as soon as the fog clears,about 8:AM, maybe 7:30. Chapman is kind of a long way out of the way forme, so I guess I will just head north and try to show up at Barber at 9:30 or10:00.Skip----- Original Message -----
Pietenpol-List: tubing size for shoulder harness assys.
Posted: Fri Jun 06, 2008 10:32 pm
by matronics
Original Posted By: shad bell
Re: Pietenpol-List: Re: Barber Field Fly-In
Posted: Sat Jun 07, 2008 4:13 pm
by matronics
Original Posted By: shad bell
Re: Pietenpol-List: tubing size for shoulder harness assys.
Posted: Mon Jun 09, 2008 5:23 am
by matronics
Original Posted By: "donald lane"
Subject: Re: Pietenpol-List: tubing size for shoulder harness assys.Tim,I used .032 4130 tube to fabricate my front seat shoulder harness attach fixture. This is what the U.K. boys used in their design. My pilot seat harnessis attached all the way back to the tailpost, via a 1/8" cable.Dan HelsperPoplar Grove, IL.**************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (
http://food.aol.com/tyler-florence?vide ... 0000000002)________________________________________________________________________________
Re: Pietenpol-List: tubing size for shoulder harness assys.
Posted: Mon Jun 09, 2008 8:14 am
by matronics
Original Posted By: AMsafetyC(at)aol.com
Subject: Re: Pietenpol-List: tubing size for shoulder harness assys.Tim,Tubing diameter is .50. Dan HelsperPoplar Grove, IL.**************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (
http://food.aol.com/tyler-florence?vide ... 0000000002)________________________________________________________________________________