Brodhead Pietenpol Association

Original Posted By: "Rick Holland"
Ken, I can't see those two bolts moving once they are torqued tight. Dan Helsper Poplar Grove, IL.------------------------------------------------------------ Looking for simple solutions to your real-life financial cha540686/aol?redir=http://www.walletpop.com/?NCID=emlcntuswall00000001" hrr=http://www.walletpop.com/?NCID=emlcntuswall00000001" target="_blank">Check out WalletPop for the latest news and information, tips and calculators.3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3Dhref='3D"http://www.matronics.com/Navigator?Piet ... ---------- - - Release Date: 9/28/2008 1:30 PM3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D------------------------------------------------------------------------------ Checked by AVG - http://www.avg.com 9/30/2008 7:08 PM________________________________________________________________________________Date: Wed, 1 Oct 2008 08:59:01 -0700

Original Posted By: "Ryan Mueller"
Subject: Pietenpol-List: Assembling hydraulic hosesI've been trying all night to screw the nipple from the Aeroquip 491 fitting onto the cut end of some Aeroquip 303 hose to make up brake hoses. Can't seem to get the hose to screw all the way into the fitting. Any tips or trickson how to get this on. My fingers are raw from pushing and twisting the hose.Tried recutting the hose several times for a clean start - no luck.Matt Paxton**************Looking for simple solutions to your real-life financial challenges? Check out WalletPop for the latest news and information, tips andcalculators. (http://www.walletpop.com/?NCID=emlcntuswall00000001)________________________________________________________________________________Date: Tue, 30 Sep 2008 23:37:46 -0500

Original Posted By: KMHeide, BA, CPO, FAAOP
Your welcome Ken. After all, it's one of the OTHER thingsthis list is all about. He said with a silly grin. :-)And I do have ONE good story. It's a bit long. It's in twoparts spanning three years. It has left four guys wondering"How did he do THAT?". :-)Clif Clif, You have clearly given me confidence in this area. I will keep to plans and forge ahead. Thanks for the great information and time to respond. Kenneth M. Heide, BA, CPO, FAAOP Of course all I've done is support the fact that damn near every Piet ever flown was built with those two bolts in the fuselage. Right? Clif "The greatest deception men suffer is from their own opinions." (Leonardo da Vinci) ----- Original Message -----

Original Posted By: H RULE
[quote="Woodflier(at)aol.com"]I've been trying all night to screw the nipple fromthe Aeroquip 491 fitting onto the cut end of some Aeroquip 303 hose to makeup brake hoses. Can't seem to get the hose to screw all the way into the fitting.Any tips or tricks on how to get this on. My fingers are raw from pushingand twisting the hose. Tried recutting the hose several times for a cleanstart - no luck. Matt PaxtonMatt,On hose assemblies here we first ream out the line (a punch works fine here), andthen apply a lite oil to the nipple and threads (male) and also again on thefemale portion as well.I hope that this helpRegards,BrettBonaco, Inc.> Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Thu, 6 Nov 2008 18:36:24 -0800 (PST)