Pietenpol-List: prefab metal parts
Posted: Tue Oct 28, 2008 11:45 am
Original Posted By: lshutks(at)webtv.net (Leon Stefan)
>Certainly not cheap=2C as it would set you back about $4600 if you purchased>all of the fuse=2C wing=2C and tail parts=2C but if you absolutely want to avoid>fabricating them yourself it's one way to go.Or... buy the project that is for sale in Michigan for $3000 and not only do you get all the fittings=2C you get a partially completed airplane to go with it and save $1600! Oscar ZunigaAir Camper NX41CCSan Antonio=2C TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________
>Certainly not cheap=2C as it would set you back about $4600 if you purchased>all of the fuse=2C wing=2C and tail parts=2C but if you absolutely want to avoid>fabricating them yourself it's one way to go.Or... buy the project that is for sale in Michigan for $3000 and not only do you get all the fittings=2C you get a partially completed airplane to go with it and save $1600! Oscar ZunigaAir Camper NX41CCSan Antonio=2C TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________