Pietenpol-List: Emailing: rudder fairing 003
Posted: Thu Mar 12, 2009 10:03 am
Original Posted By: Lawrence Williams
Here's how I did my rudder, I cut the capstrip down so it fit flush with the outside of the trailing edge and then T-88ed wood blocks to the trailing edge and full thickness of the capstrip. The same could be done with the vert. stab. but I just faired mine in. Ed G.The message is ready to be sent with the following file or link attachments:rudder fairing 003________________________________________________________________________________Date: Thu, 12 Mar 2009 15:46:53 -0700 (PDT)
Here's how I did my rudder, I cut the capstrip down so it fit flush with the outside of the trailing edge and then T-88ed wood blocks to the trailing edge and full thickness of the capstrip. The same could be done with the vert. stab. but I just faired mine in. Ed G.The message is ready to be sent with the following file or link attachments:rudder fairing 003________________________________________________________________________________Date: Thu, 12 Mar 2009 15:46:53 -0700 (PDT)