Page 1 of 1
Re: Pietenpol-List: Cut off for ad/article (Piet. news letter)
Posted: Tue Aug 04, 2009 7:29 am
by matronics
Original Posted By: "Michael Perez"
#yiv2093032156 p {margin:0;}Approximately August 31st.-Greg C.----- Original Message -----
Pietenpol-List: turning base to final for runway 36L at Oshkosh
Posted: Tue Aug 04, 2009 12:16 pm
by matronics
Original Posted By: "Cuy, Michael D. (GRC-RXD0)[ASRC Aerospace Corporation]"
Subject: Pietenpol-List: turning base to final for runway 36L at Oshkosh $1020012________________________________________________________________________________
Pietenpol-List: Re: Tensioning cables without turnbuckles
Posted: Tue Aug 04, 2009 12:19 pm
by matronics
Original Posted By: "Will42"
Subject: Pietenpol-List: OSH09 Don Emch & Larry Williams after arriving at Oshkosh.jpg Don is on left, Larry on right. By Larry's Ford Pietenpol. ________________________________________________________________________________Subject: Pietenpol-List: Re: Tensioning cables without turnbuckles
Posted: Tue Aug 04, 2009 12:21 pm
by matronics
Original Posted By: Michael Perez
OK; I've used this for years, just didn't know they had a name. Thanks for theinfo.WillRead this topic online here:
http://forums.matronics.com/viewtopic.p ... ______Date: Tue, 4 Aug 2009 10:29:13 -0700 (PDT)
Pietenpol-List: Cut off for ad/article (Piet. news letter)
Posted: Tue Aug 04, 2009 1:22 pm
by matronics
Original Posted By: Jim Markle
> Pietenpol-List: turning base to final for runway 36L at Oshkosh
Posted: Tue Aug 04, 2009 1:32 pm
by matronics
Original Posted By: Jeff Boatright
RE: Pietenpol-List: turning base to final for runway 36L at Oshkosh
Posted: Tue Aug 04, 2009 1:42 pm
by matronics
Original Posted By: owner-pietenpol-list-server(at)matronics.com
If you look closely, you can see the wing of my Piet, ahead of Mike's. Mywing is about even with the middle of the runway, and off to the right, onfinal for 36L. Don Emch is right at the end of the runway, just about totouch down. Five others had landed just ahead of Don. Quite a show,landing eight Pietenpols in a row there.Jack PhillipsNX899JP _____
Pietenpol-List: turning base to final for runway 36L at Oshkosh
Posted: Tue Aug 04, 2009 4:42 pm
by matronics
Original Posted By: "Patrick Panzera"
Man, I don't know about you guys but flying that finalwould take me about 10 minutes in 41CC, and that's atcruise power! Talk about draggin' it in...Oscar ZunigaAir Camper NX41CCSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________
Pietenpol-List: Re: Tensioning cables without turnbuckles
Posted: Tue Aug 04, 2009 6:52 pm
by matronics
Original Posted By: "Will42"
Departureshttp://
www.youtube.com/watch?v=bVvgEaEFcTQ____ ... ___Subject: Pietenpol-List: Re: Tensioning cables without turnbuckles
Pietenpol-List: Re: Brodhead Video
Posted: Tue Aug 04, 2009 9:05 pm
by matronics
Original Posted By: "K5YAC"
Clif; I like you chain link shackles. What size chain did you use for what sizecable.WillRead this topic online here:
http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Brodhead Video
Re: Pietenpol-List: ok, lemme have it!
Posted: Tue Aug 04, 2009 10:08 pm
by matronics
Original Posted By: Darrel Jones
Posted: Tue Aug 04, 2009 10:15 pm
by matronics
Original Posted By: Dan Yocum
Cool video Pat. We missed Sunday... I'll bet that was neat.--------Mark - working on wingsRead this topic online here:
http://forums.matronics.com/viewtopic.p ... ______Date: Tue, 04 Aug 2009 22:02:34 -0500
Re: Pietenpol-List: Re: Tensioning cables without turnbuckles
Posted: Tue Aug 04, 2009 11:23 pm
by matronics
Original Posted By: "Will42"
Just think. With a long enough pair we could prove theworld is flat.At least in Manitoba where you can watch your dog runaway for three days. :-)Sorry Will, I can't remember what size, just that the pinhole is 3/16". It will be in the archives somewhere.Also, just that one size for everything.No on the Gb. I was too chicken to keep putting morebricks in the milk case.Clif----- Original Message -----
Pietenpol-List: Re: Tensioning cables without turnbuckles
Posted: Wed Aug 05, 2009 12:29 am
by matronics
Original Posted By: Bill Budgell