Pietenpol-List: wing CC bottom material/covering
Posted: Sun Aug 16, 2009 2:51 pm
Original Posted By: "Cuy, Michael D. (GRC-RXD0)[ASRC Aerospace Corporation]"
Subject: Pietenpol-List: wing CC bottom material/covering Tim-- I sheathed my wing CC in 1/8" birch plywood and it has held up well to thetents, sleeping bag, oil, rags, and such that I've put in there ontrips over the year---including a nice folding chair. I did the basic center section but cut out the center rib for storage--I leftthe backbone of the bottom of the CC rib bottom in the CC to help glue the1/8" birch plywood and keep it's shape but otherwise--cut the thing out for storagepurposes just like you would do if you were putting a fuel tank up there.Mike C________________________________________________________________________________
Subject: Pietenpol-List: wing CC bottom material/covering Tim-- I sheathed my wing CC in 1/8" birch plywood and it has held up well to thetents, sleeping bag, oil, rags, and such that I've put in there ontrips over the year---including a nice folding chair. I did the basic center section but cut out the center rib for storage--I leftthe backbone of the bottom of the CC rib bottom in the CC to help glue the1/8" birch plywood and keep it's shape but otherwise--cut the thing out for storagepurposes just like you would do if you were putting a fuel tank up there.Mike C________________________________________________________________________________