Page 1 of 1
Re: Pietenpol-List: go/ no go tool--- a must when using Nicopresstools
Posted: Wed Sep 02, 2009 10:55 pm
by matronics
Original Posted By: Robert Ray
Subject: Re: Pietenpol-List: go/ no go tool--- a must when using Nicopresstools
> > Re: Pietenpol-List: go/ no go tool--- a must when using
Posted: Wed Sep 02, 2009 11:06 pm
by matronics
Original Posted By: shad bell
Re: Bell's carb heat muff, was Re: Pietenpol-List: Nicopress tools
Posted: Thu Sep 03, 2009 6:38 am
by matronics
Original Posted By: Michael Perez
RE: Pietenpol-List: Fuselage wedges on sides
Posted: Thu Sep 03, 2009 8:29 am
by matronics
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Depends entirely on how hard you land. Under normal conditions, the wedgesare probably not necessary at all. If you can guarentee you will never makea really hard landing, don't put them in.Understand that a lot of this airplane (like most airplanes) is"overdesigned" for normal circumstances. Frankly, I want an airplane thatcan handle extraordianry circumstances and not fail. It's your choice.Jack PhillipsNX899JPRaleigh, NC _____